|
Triple T Sales |
|
Trucks-Trailers-Tractors |
 Triple
T, Montana Tractors
I've owned several loader
tractors in my decades on the farm, backhoe
business & custom haying. Montana's have what I
look for, solid....
More...
|
|
|
QuickBite Couplers will amaze you.
Self aligns for auto latching trailer hookup.
More... |
|
|
| |
|
Cooler Transmissions for Nissan
Titan
 Inglewood,
CA –
PML announced today
a new, aftermarket deep aluminum transmission pan for Nissan RE5-R05A
transmissions found in Titan trucks and Armada SUVs. PML designed and
developed this pan in response to demand from Titan owners for an
extra-capacity pan.
PML’s Nissan transmission pan
helps keep transmission oil cool in three ways. First, the pan
adds 3.5 additional quarts of oil capacity. Second, the pan features
raised fins on the outside. Third, PML designed cast-in baffles on the
inside of the pan that keep oil near the filter inlet and aid in heat
transfer from the oil to the pan.
PML’s new transmission pan also features a cast-in
boss that can be drilled and tapped for a temperature sensor, 3/16-inch
thick wall to add strength to the transmission case, 3/8-inch thick
gasket flange for a secure seal, and a magnetic drain plug for easier,
less messy maintenance.
This pan is made in the USA by PML. To purchase
a pan or for more information, please contact PML.
The pan is available in as-cast,
black, and polished finishes. The PML part number is 11037. PML also
manufactures and sells a matching
Titan differential cover.
|
 Inglewood,
CA – PML now offers an extra deep aluminum transmission pan for 2007 and
newer Dodge Ram 2500 and 3500 diesel trucks with 6.7L engines. This new
pan adds four additional quarts of oil capacity to the 6-speed 68RFE
transmission in these heavy duty trucks.
The increased oil capacity and raised fins
on the outside help reduce oil temperatures, resulting in less wear and
tear on the transmission. The pan has cast-in internal baffles to keep
the oil near the filter inlet, preventing the need for a filter
extension.
The pan also features: a cast-in boss that can be drilled and tapped for
a temperature sensor, 3/16-inch thick wall to add strength to the
transmission case, 3/8-inch thick gasket flange for a secure seal, and a
magnetic drain plug for easier, less messy maintenance.
The pan is available in as-cast, black, and polished finishes. The PML
part number is 11039. The pan also fits vehicles with the Dodge 545RFE
transmission such as the Ram 1500 with the 4.7 or Hemi engine, 2000 and
newer Dakota and Durango with the 4.7 engine, and 1999 and newer Jeep
Grand Cherokee with 4.7 engines. |
Award Winning Valve Covers
Inglewood, CA, January 18, 2007 – At the SEMA
Show November 2007, PML won a Global Media award for their new sand
cast aluminum valve covers with vintage CHEVROLET® or
CORVETTE® script and fins. These new covers are now
available.
These aftermarket valve covers will
fit the heads found on many crate engines, mid-90s Pontiac Trans Am
and Firebird, and 1987-1998 Silverado, Sierra, Suburban, Tahoe,
Corvette, Impala SS, and Camaro Z28.
PML designed these covers for a clean
and classic appearance. The design removed two boltholes and the PCV/breather/oil
fill holes from the top surface and added raised CHEVROLET or
CORVETTE script and fins. These covers use only the two outer
boltholes. The sand cast aluminum construction is so much stiffer
than stock that you do not need four bolts to apply pressure evenly
to the gasket.
If holes are needed for oil fill, PCV,
or breather, they can be cut into the intake side of the valve
cover. Baffles are cast into the interior of the cover in two
locations opposite where the holes would go. This leaves the top
surface where the fins and lettering are completely clean.
The covers are slightly taller than
stock to allow roller tip rockers and are designed to use the stock
gaskets. These valve covers are available in as-cast, black or
Chevrolet orange powder coated with brushed fins and script, and
polished finishes. The PML part number is 11040 for the CHEVROLET
script and 11041 for the CORVETTE script.
About PML: In 1986, PML began by
providing dimensional inspection, prototyping, tooling, reverse
engineering, and CAD modeling to the manufacturing industry. In
1998, PML began the transition to the automotive aftermarket with
the design and manufacture of Cadillac valve covers. Today, PML
offers more than 100 pans and covers. All PML products are designed
and manufactured in the USA. PML is a member of SEMA, ORBA, and the
Goodguys Rod & Custom Association.
General Motors Trademarks are used under license
to PML, Inc.
|
|
CHEVROLET script, as-cast finish. Click on image to view or save 300
dpi jpg file.
Click
here for a 4" wide jpg file.
Click
here for a tiff file. |
|
|
CHEVROLET script, polished finish. Click on image to view or save
300 dpi jpg file.
Click
here for a 4" wide jpg file.
Click
here for a tiff file. |
|
CORVETTE script, as-cast. Click on image to view or save 300 dpi jpg
file.
Click
here for a 4" wide jpg file.
Click
here for a tiff file. |
|
|
CORVETTE script, polished finish. Click on image to view or save 300
dpi jpg file.
Click
here for 4" wide jpg file.
Click
here for tiff file. |
|
|
Both styles, pictured together, CORVETTE script on top, Chevrolet on
the bottom. Click on image to view or save 300 dpi jpg file.
Click
here for a 4" wide jpg file.
Click
here for a tiff file. |
Differential Cover for
the Chevrolet SSR
 Inglewood,
CA – PML announces an aftermarket differential cover for the
Chevrolet SSR. The cover features extra capacity, sand cast aluminum
construction, and a drain hole with a magnetic drain plug. PML
designed this cover for the Torsen 10 bolt rear axle found in
2003-06 SSR with automatic transmission and other GM vehicles such
as Trailblazer, Envoy, Colorado, Canyon, Olds Bravada, and Buick
Renier.
This differential cover increases fluid capacity by 0.5 quarts
over stock. The increased capacity reduces temperatures, lessening
wear and tear on the differential. On the outside of the cover,
raised fins help keep oil cool and add a custom look.
 The
sand cast aluminum construction adds 3/16-inch thick wall
construction to add strength to the differential housing and
3/8-inch thick gasket flange that will not bend when bolts are
tightened. The gasket flange is machined for a secure seal with RTV
or factory reusable gasket.
The drain hole allows for easier, less messy maintenance. A
magnetic drain plug collects any metal bits so the differential
fluid is kept cleaner. The cover has a fill hole on top and on the
side there is a cast-in boss that can be drilled and tapped for a
temperature sensor.
PML offers this differential cover in three finishes: cast
aluminum, black, and polished. The PML part number is 11035.
About PML: In 1986, PML began by providing dimensional inspection,
prototyping, tooling, reverse engineering, and CAD modeling to the
manufacturing industry. In 1998, PML began the transition to the
automotive aftermarket with the design and manufacture of Cadillac®
valve covers. Today, PML offers more than 100 pans and covers. All
PML products are designed and manufactured in the USA. PML is a
member of SEMA, ORBA and Goodguys Rod and Custom Association
|
Center of Attention for
Center Bolt Small Block ChevyTM Engines
 Inglewood,
CA, May 20, 2006 – PML announces sand-cast aluminum valve covers
for 1987-1998 small block Chevrolet® center bolt style heads.
These heads are found on Silverado/Sierra, Suburban, Tahoe,
Corvette, Impala SS, and Camaro Z28. Instead of four bolts,
these covers require two bolts for assembly for a cleaner
appearance.On the inside,
these valve covers feature cast-in baffles. On the outside, the
covers have fins for a custom look. The covers are slightly
taller than stock to allow roller tip rockers. Sand-cast
aluminum construction adds thick walls for strength and thick
gasket flanges for a secure seal. Two locations on the intake
manifold side can optionally be machined for PCV or breather
holes. These valve covers are available in as-cast, black or
Chevrolet orange powder coated with brushed fins, and polished
finishes. The PML part number is 10534.
About PML: In 1986, PML began by
providing dimensional inspection, prototyping, tooling, reverse
engineering, and CAD modeling to the manufacturing industry. In
1998, PML began the transition to the automotive aftermarket
with the design and manufacture of Cadillac valve covers. Today,
PML offers more than 100 pans and covers. All PML products are
designed and manufactured in the USA. PML is a member of SEMA
and ORBA.
|
|
A Titan of a
Differential Cover
Inglewood, CA – June 1, 2005 – PML now
manufactures and sells a new extra-capacity differential cover for the
Nissan Titan. PML designed this cover with fins and additional oil
capacity for cooler differential temperatures. Many Titan owners have
reported overheating especially when towing
and have been looking for a way to reduce temperatures. PML heard from
these owners and designed a cover in response to their needs. PML
received over 25 pre-orders for these covers before starting production.
The new PML Nissan Titan rear differential
cover features 0.75 quarts more oil capacity than the stock 2005 cover.
With fins, the new cover is 1 1/4 inches deeper than stock 2005 cover, 2
inches deeper than the stock 2004 cover. The cover has a boss for a
temperature sensor, a level check/fill hole and includes mounting bolts.
Like all PML covers, it also features sand-cast aluminum construction,
thick walls to add strength to the differential housing, a .375" thick
gasket flange that will not bend when bolts are tightened, and a
machined gasket surface for a secure seal using RTV or factory gasket.
The differential cover is available in three
finishes: as-cast, black powder coated, polished.
About PML: PML began in 1986
providing first article and dimensional inspection to the Southern
California manufacturing industry. Services expanded to include
prototyping, tooling, reverse engineering, CAD modeling, and designing
and manufacturing automotive products. All PML products are designed
and manufactured in the USA. PML is a SEMA member and holds current ISO
9001:2000 certification. |
|
PML Dana 60 Front Differential Cover
 Inglewood,
CA – September 15, 2003 – PML now manufactures a differential cover for Dana
60 front differentials. This differential cover fits many Super Duty Ford
and Dodge Ram 2500 and 3500 trucks. The PML Dana 60 front differential cover
is slightly taller than stock height with room for steering linkage
clearance. For off-road, towing, or heavy-duty applications, the cover has
increased oil capacity and strong cast-aluminum construction.
The PML Dana 60 front differential cover
features increased capacity of 0.6 quarts over stock for lower oil
temperatures. Heat causes oil to break down which results in added wear on
the gears and bearings in the differential. The cover has stiff aluminum
construction with 0.160” thick walls for increased torsional strength to the
differential housing. The precision-machined gasket flange is 0.350” thick
to provide a uniform clamping force on the gasket. This ensures a secure
seal. A magnetic drain plug allows easy oil changes without the mess of
removing the whole cover. The cover has three holes for drain, fill and
check. Raised fins give a custom look
The PML Dana 60
front differential cover is available in three finishes: as-cast, black
powder coated, polished.
About PML: PML began in 1986 providing
first article and dimensional inspection to the Southern California
manufacturing industry. Services expanded to include prototyping, tooling,
reverse engineering, CAD modeling, and designing and manufacturing
automotive products. All PML products are designed and manufactured in the
USA. PML is a SEMA member and holds current ISO 9002 certification.
PML Ford 9.75 RG, 12 Bolt Differential Cover
 Inglewood,
CA – September 15, 2003 – PML now manufactures a differential cover for Ford
9.75 ring gear, 12 bolt applications. These differentials are found on Ford
F150 and Expedition vehicles. For off-road, towing, or heavy-duty
applications, the cover has increased oil capacity and strong cast-aluminum
construction.
The PML Ford 9.75 RG, 12 bolt differential cover
features increased capacity of 0.5 quarts over stock for lower oil
temperatures. Heat causes oil to break down which results in added wear on
the gears and bearings in the differential. The cover has stiff aluminum
construction with 0.160” thick walls for increased torsional strength to the
differential housing. The precision-machined gasket flange is 0.350” thick
to provide a uniform clamping force on the gasket. This ensures a secure
seal. The cover has drain and fill holes. A magnetic drain plug allows
easy oil changes without the mess of removing the whole cover. Raised fins
give a custom look
The PML Ford 9.75
RG, 12 bolt differential cover is available in three finishes: as-cast,
black powder coated, polished.
About PML: PML began in 1986 providing
first article and dimensional inspection to the Southern California
manufacturing industry. Services expanded to include prototyping, tooling,
reverse engineering, CAD modeling, and designing and manufacturing
automotive products. All PML products are designed and manufactured in the
USA. PML is a SEMA member and holds current ISO 9002 certification.
New PML Ford
TorqShift™ Deep Transmission Pan
 Inglewood,
CA – October 10, 2003 – PML now manufactures an extra capacity Ford
TorqShift transmission pan. This transmission is used with the 6.0L Power
Stroke Diesel. PML designed this deep pan to help the TorqShift
transmission better handle the high stresses of towing and hauling.
The PML Ford TorqShift deep transmission pan
features a capacity of 4.5 quarts over stock for reduced oil temperatures.
The sand-cast aluminum construction and design provide strength and great
looks. Raised fins also keep oil cool and add to the custom look. The pan
has a precision-machined 0.350 inch-thick gasket flange for a uniform
clamping force on the gasket so the pan is much less prone to leak than a
stock pan which is typically 0.035 inch-thick stamped steel. The pan comes
with a magnetic drain plug for easy oil changes and an un-drilled boss for
temperature sensors. PML designed the Ford TorqShift deep transmission pan
with thick wall construction to add strength to the whole transmission case.
The PML Ford TorqShift deep transmission pan is
available in three finishes: as-cast, black powder coated, polished.
About PML: PML began in 1986 providing
first article and dimensional inspection to the Southern California
manufacturing industry. Services expanded to include prototyping, tooling,
reverse engineering, CAD modeling, and designing and manufacturing
automotive products. All PML products are designed and manufactured in the
USA. PML is a SEMA member and holds current ISO 9002 certification.
|
|
New PML AAM 11.5 RG, 14
Bolt Differential Cover
 Inglewood,
CA – November 1, 2004 – PML now has an extra-capacity differential cover
for rear differentials on 2003 and newer Dodge Ram 2500 & 3500 trucks.
PML designed this differential cover to make it easy to follow the 15K
oil change interval that Dodge specifies for the AAM axles used in 2003
and newer Ram 2500 & 3500 trucks.
The cover features oil
fill, level check, and drain holes and an undrilled boss for a
temperature sensor. It holds 0.75 quarts over stock. The increased oil
capacity and the raised fins help reduce oil temperatures. The cover
also features a precision-machined 3/8-inch gasket flange for a leak
free seal. The thick wall sand-cast aluminum construction adds strength
to the differential housing. The cover comes with a magnetic drain plug.
 These
features benefit those using their Dodge Ram for towing or hauling or in
harsh driving conditions. PML also makes a matching differential cover
for the front differential (AAM 9.25 RG, 14 Bolt) and a cover for the
smaller 10.5 RG differential also found on these Dodge RAM trucks. The
PML AAM 11. 5 RG, 14 Bolt differential cover is available in three
finishes: as-cast, black powder coated, polished.
About PML: PML
began in 1986 providing first article and dimensional inspection to the
Southern California manufacturing industry. Services expanded to
include prototyping, tooling, reverse engineering, CAD modeling, and
designing and manufacturing automotive products. All PML products are
designed and manufactured in the USA. PML is a SEMA member and holds
current ISO 9001:2000 certification. |
|
New PML AAM
10.5 RG, 14 Bolt Differential Cover
 Inglewood,
CA – October 20, 2004 – PML now has an extra-capacity differential cover for
rear differentials on 2003 and newer Dodge Ram 2500 & 3500 trucks. PML
designed this differential cover to make it easy to follow the 15K oil
change interval that Dodge specifies for the AAM axles used in 2003 and
newer Ram 2500 & 3500 trucks.
 The cover
features oil fill, level check, and drain holes and an undrilled boss for a
temperature sensor. It holds 0.8 quarts over stock. The increased oil
capacity and the raised fins help reduce oil temperatures. The cover also
features a precision-machined 3/8-inch gasket flange for a leak free seal.
The thick wall sand-cast aluminum construction adds strength to the
differential housing. The cover comes with a magnetic drain plug.
These
features benefit those using their Dodge Ram for towing or hauling or in
harsh driving conditions. PML also makes a matching differential cover for
the front differential (AAM 9.25 RG, 14 Bolt) and a cover for the larger
11.5 RG differential also found on these Dodge RAM trucks. The PML AAM 10.
5 RG, 14 Bolt differential cover is available in three finishes: as-cast,
black powder coated, polished.
About
PML: PML began in 1986 providing first article and dimensional
inspection to the Southern California manufacturing industry. Services
expanded to include prototyping, tooling, reverse engineering, CAD modeling,
and designing and manufacturing automotive products. All PML products are
designed and manufactured in the USA. PML is a SEMA member and holds
current ISO 9001:2000 certification.
For more info on PML products, click
|
|
Roadside Assistance for Equestrians.
